User guide

WA_DEV_FEX20_UGD_002 Rev 004 March 08, 2011 22
2. Features and Services
This section enumerates the features and services available on the Fastrack Xtend series.
2.1. Features and Services
Refer to the table below for the list of basic features available on the Fastrack Xtend.
Table 4. Fastrack Xtend Basic Features
Features
Description
Sierra Wireless
Software Suite
(does not apply to
FXT004)
 Sierra Wireless Software Suite programmable:
 Native execution of embedded standard ANSI C applications
 Custom AT command creation
 Custom application library creation
 Standalone operation
 Interface for embedded applications (does not apply to FXT004)
 Plug-In compatible (does not apply to FXT004)
Standard
(does not apply to
FXT004)
 850MHz / 900 MHz
 E-GSM compliant
 Output power: class 4 (2W)
 Fully compliant with ETSI GSM
phase 2 + normal MS
 1800 MHz / 1900MHz
 Output power: class 1 (1W)
 Fully compliant with ETSI GSM
phase 2 + normal MS
GPRS
(does not apply to
FXT004)
 Class 10 (FXT001, FXT002, FXT003, FXT009 and FXT010)
 Up to Class 12 (FXT003 only)
 PBCCH support
 Coding schemes: CS1 to CS4
 Compliant with SMG31bis
 Embedded TCP/IP stack
EGPRS
(for FXT002,
FXT003, FXT009
and FXT010 only)
 Class 10 ( FXT002, FXT003, FXT009 and FXT010)
 Up to Class 12 (FXT003 only)
 PBCCH support
 Coding schemes: MCS1 to MCS9
 Compliant with SMG31bis
 Embedded TCP/IP stack
Interface
 RS232 (V.24/V.28) Serial interface supporting:
 Baud rate (bits/s): 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200, 230400, 460800 and 921600
 Autobauding (bits/s): from 1200 to 921600.
 2 General Purpose Input/Output gates (GPIOs) available.
 1.8 V / 3 V SIM interface. (Does not apply to FXT004)
 AT command set based on V.25ter and GSM 07.05 & 07.07
SMS
 Text & PDU
 POINT TO POINT (MT/MO)
 Cell broadcast