Specifications

WA_DEV_FEX20_PTS_004 Rev 001 June 30, 2010 37
Expansion Card Product Technical
Specification
Reliability Compliance and
Recommended Standards
Document
Current
Version
Title
IEC60068238
2.0
Environmental testing - part 2-38: Test Z/AD: composite
temperature/humidity cyclic test.
IEC60068240
1.0 w/A1
Basic environmental testing procedures - part 2: Test Z/AM combined
cold/low air pressure tests.
ISO167501
2ND
Road vehicles - environmental conditions and testing for electrical and
electronic equipment - part 1: general.
ISO167502
2ND
Road vehicles - environmental conditions and testing for electrical and
electronic equipment - part 2: electrical loads.
ISO167503
2ND
Road vehicles - environmental conditions and testing for electrical and
electronic equipment - part 3: mechanical loads.
ISO167504
2ND
Road vehicles - environmental conditions and testing for electrical and
electronic equipment - part 4: climatic loads.
IEC60529
2.1 w/COR2
Degrees of protection provided by enclosures (IP code).
IEC60068217
4.0
Basic environmental testing procedures - part 2: Test Q: sealing.
IEC60068218
2.0
Environmental testing - part 2-18: Tests - R and guidance: water.
IEC60068270
1.0
Environmental testing - part 2: tests - test XB: abrasion of markings and
letterings caused by rubbing of fingers and hands.
IEC60068268
1.0
Environmental testing - part 2: tests - test l: dust and sand.
IEC60068211
3.0
Basic environmental testing procedures, part 2: test KA: salt mist.
IEC60068260
2.0
Environmental testing - part 2: Test KE: flowing mixed gas corrosion test.
IEC60068252
2.0 w/COR
Environmental testing - part 2: Test KB: salt mist, cyclic (sodium chloride
solution).
6.3. Environmental Specifications
The Fastrack Xtend is compliant with the operating classes listed below. To ensure the proper
operation of the Expansion Card, the temperature of the environment must be within the specified
range as described in the following tables.
Table 36: Operating Class Temperature Range without an Expansion Card
Conditions
Temperature Range
Operating / Class A
-20 °C to +55°C
Operating / Class B
-30 °C to +75°C
Operating / Class C
-30 °C to +85°C
Storage
-40 °C to +85°C
6.3.1. Function Status Classification
The classes reported below comply with the Annex “ISO Failure Mode Severity Classification”, ISO
Standard 7637, and Section 1.
Note: The word “function” used here only concerns the function performed by the Fastrack Xtend.