User guide
Table Of Contents
- 1: Get Started
- 2: Use Your Mobile Hotspot
- Set Auto Connect and Network Options
- View Data Usage
- Select a Language
- Enable / Disable Wi-Fi
- View / Block Connected Users
- Add a Wireless Device to your Wi-Fi Network
- View Messages / Alerts
- Use the GPS Feature
- Battery Settings
- Set Audio Alerts
- Change Device Security Settings
- View Details About Your Mobile Hotspot
- Use the microSD Card to Share Files over Wi-Fi
- Recharge the Battery
- Update the Firmware
- 3: Advanced Settings
- Show Help for Advanced Settings
- Do not Automatically Install Driver for USB Tethering
- Export / Import Router Options
- Set Display Options
- Lock or Unlock Device Keys
- View WAN Information
- Set Connection Preferences
- Enable SIM Security
- View Wi-Fi Status and List of Connected Devices
- Set Wi-Fi Network Options
- Set Wi-Fi Security Options
- Set MAC Filter Mode
- Enable Port Forwarding
- Enable Port Filtering
- Enable VPN Passthrough
- Enable DMZ
- Enable Universal Plug and Play
- Set Router LAN Options
- 4: Frequently Asked Questions
- 5: Troubleshooting
- 6: Specifications
- 7: Regulatory and Safety Information
- Index
AirCard 763S Mobile Hotspot User Guide
30
4. Set the desired options. For example, you can:
· Turn the Power LED and LCD backlight off.
· Set the time after which the LCD backlight turns off. (The shorter the time,
the longer the battery life.)
· Set the LCD backlight settings to Dim.
5. Click Save.
For more details, see Set Display Options on page 46.
Set Audio Alerts
You can configure your mobile hotspot to sound an audio alert (beep) when the
status changes. For example:
• When the connection status changes
• When you receive an alert
• When the battery is low
• When the mobile hotspot enters standby mode
To set the audio alerts:
1. Press the Navigation key to cycle through the LCD screens. On the
Messages / Alerts screen, ensure the Audio is enabled. (If Audio is disabled,
follow the instructions on the LCD screen to enable it.)
2. On the homepage, log in as Administrator.
3. Click the Sounds icon ( ).