Installation guide

AirCard 800 Series Installation Guide
Note: Do not forcefully insert the
AirCard modem. This may
damage connector pins. If you
have more than one PC Card
slot, you may obtain better signal
strength using the top slot.
2. From the CD start-up menu, select your language, then
notebook installation, and then the link under notebook
software installation
to launch the installer.
3. Use the
Next and Back buttons to navigate through the
installer.
4. If the SIM is not already inserted in your AirCard modem,
insert it. (See page 13.)
5. For the AirCard 850 modem / AirCard 860 modem:
If the antenna is not yet attached, attach it. (See page 17.)
6. With the label facing up, insert the AirCard modem into
your PC Card slot.
Figure 3-1: Inserting the AirCard modem
To close the CD start-up menu, click the exit option in the lower
right corner of the window.
Watcher should launch automatically when the AirCard
modem is inserted. If your AirCard modem has not yet been
configured to use your account, you are prompted to do so.
See “Setting up a profile” on page 24.
Setting Internet Explorer to use
the AirCard modem
If you are using Internet Explorer as your browser, and it is set
to connect to the Internet through a dial-up modem, you must
set it to use a LAN (local area network) card.
To set Internet Explorer version 5 or 6 to use a LAN, follow
these steps:
1. In Internet Explorer, select
Tools > Internet Options.
2. Click the
Connections tab.
3. Click
Setup to run the Internet Connection wizard.
2130623 20