Specifications

90 Section 4A: Technical Specifications
LED Operation
Your device has two LED lights. The LEDs operate as follows:
LED State Indicates
Data Off The device has no power. The device may not be
completely inserted into the computer, the
computer may be in suspend mode (which powers
down the device), or you have powered the device
off (page 42).
Solid
green
The device has power, has found a signal, and is
ready to connect.
Green,
blinking
slowly
The device is powering up, or no service is available.
See “Searching for Service” on page 82.
Green,
blinking
rapidly
The device is sending or receiving data.
PWR Off The device has no power. The device may not be
completely inserted into the computer, the
computer may be in suspend mode (which powers
down the device), or you have powered the device
off (page 42).
Red The device has power; the battery is low.
Charge the battery by inserting the device into the
USB slot of your computer. Alternatively, insert the
device into the docking station, and attach the
docking station to your computer.
Green The device has power; the battery is charged.