User guide

AirCard 555 Network Card User Guide
72 2130142
2. Click the Add… button to open the Connection Properties
window.
3. Enter a name for the connection and complete the
remaining fields noting the following:
· If the phone number must be preceded with an area
code, click the
Use area code check box and enter the area
code. Click the
Use 1 check box if the phone number
must be prefixed with a 1.
· Enter a user name if it is required. If you want to store a
password so that it is not necessary to enter it each time
you connect, click the
Save password check box and enter
your password.
4. Click OK to close the window and save the information
you entered, or
Cancel to close the window without saving.
To change an existing record in the Dial-Up Manager window:
1. Click the connection to select it and click the Properties…
button to open the Connection Properties window.
2. Enter the new information in the appropriate fields. (The
Connection Name cannot be changed.)
3. Click OK to close the window and save the information
you entered, or
Cancel to close the window without saving.
To delete a record in the Dial-Up Manager window:
1. Click the connection to select it and click the Delete button.
2. When prompted to confirm the deletion, click Yes.
To connect to a number in the Dial-Up Manager window:
1. Click the connection to select it and click the Connect
button.
The AirCard then attempts a connection to the phone number
you selected.