User guide

Chapter 14: The Watcher Menu Options
Rev 3.3 May.02 155
Installation and Use on
Handheld/Pocket PCs
3. Enter a name for the connection and complete the
remaining fields noting the following:
· If the phone number must be preceded with an area
code, tap the
Use area code check box and enter the area
code. Tap the
Use 1 check box if the phone number must
be prefixed with a 1.
· Enter a user name if it is required. If you want to store a
password so that it is not necessary to enter it each time
you connect, tap the
Save password check box and enter
your password.
4. Tap Save (Pocket PCs) or OK (Handheld PCs) to close the
window and save the information you entered, or
Cancel
(Pocket PCs) or the close button (Handheld PCs) to close
the window without saving.
To change an existing record in the Dial-Up Manager window:
1. Tap the connection to select it and tap the Properties…
button to open the Connection Properties window.
2. Enter the new information in the appropriate fields. (The
Connection Name cannot be changed.)
3. Tap Save (Pocket PCs) or OK (Handheld PCs) to close the
window and save the information you entered, or
Cancel
(Pocket PCs) or the close button (Handheld PCs) to close
the window without saving.
To delete a record in the Dial-Up Manager window:
1. Tap the connection to select it and tap the Delete button.
2. When prompted to confirm the deletion, tap Yes.
To connect to a number in the Dial-Up Manager window:
1. Tap the connection to select it and tap the Connect button.
The AirCard then attempts a connection to the phone number
you selected.