Installation guide

ManualsBrandsSierra Wireless ManualsComputer equipmentAirCard 555 Wireless

Fax Configuration

Rev 4 Mar.11 53

13. BesidetheFlow Controloption,enter:

AT+FCLASS=2.0;+FLO=2

14. EnsurethattheUse hardware flow controlboxischecked.

15. Click

OKinthePropertieswindow.

ReceiveandDialingSetup

16. Clickthe

Receive Setupbutton.

17. Checktheboxbeside

Automatically answer incoming callsand

settheapplicationtoanswerafter

2 rings.

18. Click

OK.

Note: To determine the

modem’s phone number, launch

Watcher and choose HELP >

About. (Admin >About on

Pocket PCs)

19. ClickDialing Setup,thensele cttheLocationtab.

20. Ensurethatthephonenumberforthemodemisentered

intotheappropriatefields.Click

OK.

21. Choose

OKagain,thenClose.

Themodemisnowconfiguredforsendingfaxes.Seethe

sectionbelowforsettingthemodemtoreceiveafax.

Note: After configuration, if the AirCard is not inserted when

WinFax PRO is launched, the WinFax settings for the AirCard are lost

and you must re-enter them.

Receiving faxes

Note: The CDMA network

requires that you pre-configure

the modem for answering a fax

call before the call rings.

Toreceivefaxessuccessfully,youmustsetthe AirCardto

receiveincomingcallsasfaxcalls,notdataorvoice.Todoso:

1. StarttheWatchersoftwarefromtheWindowsSt artmenu

orthedesktopicon.

2. Select

TOOLS > OptionstoopentheOptionswindow.

3. Selectthe

NetworktaboftheOptionswindow.

4. Usethe

Incoming Calls: Answerdrop‐downmenutoselect

oneof:

next call as Fax

· all calls as Fax

5. ClickOKtosavethesetting.

6. StartWinFaxandwaitfortheincomingcall.

Note: Watcher reverts to answer all calls as voice whenever it is

started.