Installation guide

Installation Guide
52 2130163
Pleaseconsulttheappropriatedocumentationandsupport
resourcestoensurethatthesoftwareandhardwareare
properlyinstalledandconfigured.Testotherconnectiontypes
(voice,data)toensurethatthemodemisworkingproperly
beforeproceeding.
Initial WinFax setup
Note: After configuration, if the
AirCard is not inserted before
WinFax PRO is launched, the
WinFax settings for the AirCard
are lost and you must re-enter
them.
Note: WinFax PRO 10.0 must already be installed on your computer.
Also ensure that the AirCard is inserted in your computer’s PCMCIA
(PC Card) slot before proceeding.
1. LaunchtheWinFax PROMe ssageManagerasdescribedin
yourWinFaxdocumentation(viatheStartmenuor
desktopicon).
2. Fromthemenubar,choose
Tools > Program Setup.
3. Double‐click
Modems and Communications Devices.
4. ChecktheActiveboxforthe
Sierra Wireless AirCard 555
Modem
only. UncheckanyotherActivecheckboxesforall
otherdevices.
Ifamessageappears,sayingthat“
The AirCard 555 has not
been configured to work with WinFax PRO. Do you want to run
the WinFax PRO modem configuration wizard now?”,choose
Yesandacceptthedefaultsforthewizard(Next,Next,Next,
and
Finish).Otherwiseskiptostep5.
5. WhenpromptedforLocations,choose
Cellular (PCS/GSM-
Digital)
only.(YoumayneedtochecktheActiveboxforthe
AirCard 555again.)
ModemProperties
6. Highlight
Sierra Wireless AirCard 555 Modemandchoose
Properties.
7. Selectthe
Generaltab.
8. Under
Communications Port,ensurethatTAPIandInitialize at
19200 bps
areselected.
9. UndertheModem Typecategory,ensurethatClass 2.0is
selected.
10. Selectthe
Faxtab.
11. Ensurethat
Regular or Cellular (PCS-GSM-Digital)hasbeen
selectedfromthe
Modem Connectiondrop‐downlist.
12. Inthe
Initialization String Sequencesection,thefieldsshould
befilledinasfollows:
·
AT&F&C1&D2S7=55(Mayormaynotbesetbydefault.)
·
ATE1V1
· AT$QCVAD=2