Installation guide

Watcher™ Basics
Rev 4 Mar.11 47
Call Status Area
TheCallStatusAreadisplaysmessagesrelatedtothestatusor
progressofaconnection.
Whereadurationtimerisshown, timingbeginswhenthecall
isinitiated—notfromthetimethecallisfullyconnected.This
isameasureofthetime theAirCardhasbeenusingtheradio
channel
(awirelessnetworkresource).
“
Click this display to exit PowerSave mode”indicatesthatthe
AirCardcouldnotfindaCDMA systemwithina15 minute
interval.Toconservepower,theAirCardreduceschannel
scanningtoonceeverythreeminutes.ToforcetheAirCardout
ofPowerSavemode,clickintheCallStatusArea.TheAirCard
performsachannelscanand,ifno
networkisdetected,returns
toPowerSavemode.
The In Use indicator shows whether a call is in progress. No icon is displayed when the
AirCard is idle. Otherwise, one of these icons is displayed:
A voice call is in progress.
A circuit switched data call is in progress.
A high-speed (1X) packet data call is in progress.
A high-speed (1X) packet data connection is dormant; the radio channel
has been released allowing you to make and receive voice calls. You
can resume data transmission (when not in a voice call) without the
need of re-establishing the connection.
Some applications may not be able to function on a dormant
connection.
A fatal error has occurred and the AirCard is inoperable. (This may be
resolved by closing Watcher and restarting your PC.)
Table 7-1: Connection Status Area icons (cont.)
Icon Meaning