Installation guide

Activation
Rev 4 Mar.11 37
Voice-assisted and automated
activation
TouseVoice‐assistedorautomatedactivation:
1. Ifpromptedto,connectanapprovedheadsettothe
AirCard,andputtheheadseton.
2. Selectthe
Voice-Assisted ActivationorAutomated Activation
radiobuttonandclick
Next.
3. Thewizardadvisesthatitwillmakeanetworkconnection,
dialingthedisplayednumber.Leavethenumber
unchangedunlesstoldbyatechnicalservicerepresen‐
tativetoenteradifferentvalue.Click
Next.
4. Followanyinstructionsorpromptsprovidedtoactivate
thecard.
Watcherdisplaystheactivationprogressinthecallstatusarea.
Whentheprocessiscompleteyoushould seethemessage
“Ready to Connect”. Atthispoint yourAirCardisreadytouse.
ThenextchaptersexplainhowtouseWatchertomanageand
monitoryourconnections.
Note: If you do not get the “Ready to Connect” message, retry the
process. If the process continues to fail, use manual activation or
contact your service provider.