Installation guide

Installation Guide
30 2130163
ToinstalltheAirCard,yourCEdevicemusthavethese
resources:
Determining your version of Windows CE
Pocket PCusers:If youdonotknowwhatversionof
Windows CEyouareusing,onthedevice:
1. Select
Start > Settings
2. TaptheSystemtab
3. Tapthe
Abouticon.
· “
Windows 4.20.1081 (Build…)”indicatesthatyour
operatingsystemisPocket PC2003
· “
Windows 3.0.11171 (Build…)”indicatesthatyour
operatingsystemisPocket PC2002
· “
Windows 3.0.9348 (Build…)”indicatesthatyouroperating
systemisPocket PC
Note: ActiveSync is made by
Microsoft and is included with
PCs running Windows CE. (It is
also available from the Microsoft
web site.) ActiveSync 3.5 is
supported on Windows 98, 2000,
XP, and NT 4.0 with Service
Pack 6 or later. ActiveSync 3.7 is
supported on Windows 98 SE,
2000, Me, NT, and XP.
ActiveSync installation requirements
ThehostPC(thedesktopornotebookPCtowhichyouinstall
thesoftware)musthave:
• ACD‐ROMdrive
• ActiveSyncversion3.5or3.7installed.
Note: If you are using Pocket PC 2003 or Windows CE .NET, you
need ActiveSync 3.7 or later.
If you are using Pocket PC or Pocket PC 2002, you need ActiveSync
3.5 or later.
Youmustalsohavetheabilitytoestablishaconnection
betweentheCEdeviceandhost.Thiscouldbe:
• AcableconnectionusingeitheraUSBorserialcable
(requiringthecableandthattheCEdeviceandhosthave
thenecessaryconnectors)
• Aninfraredconnection(requiringthatboththeCE
device
andhosthaveinfraredports).
Table 4-1: CE Device Resource Requirements
Card Slots 1 Type II PCMCIA (PC Card) Slot
(An accessory pack on Pocket PCs)
Memory 900 kB