Installation guide

Rev 4 Mar.11 29
4
4: Installation on Devices Running
Windows CE
• System requirements
• Software installation
• Card insertion and
removal
Thischapterprovidesinstallationinstructionsforusersof
computersrunningtheWindowsCEoperatingsystem.The
AirCardrunsonHandheld,Pocket,andTabletPCsrunning
Windows CE3.xandCE .NET(CE .NETissometimescalled
“CE 4.x”).
Note: Do not insert the AirCard into your PC Card slot before
installing the software.
BeforeinstallingtheAirCardsoftwareonyourCEdevice,
ensureyouhavetherequiredhardwareandsoftware.Since
softwarecannotbedirectlyinstalledtoa CEdevice,you
requireadesktopornotebookPCtoperformtheinstallation.
Duringtheinstallation,youinstallthesoftwaretoades ktopor
notebookPC
thatfunctionsasthe“host”.Thehostconnectsto
theCEdevicebyacableorinfraredportsandthesoftwareis
downloadedfromthehosttotheCEdeviceusingthe
MicrosoftActiveSync®application.
System requirements
TheseWindowsCEoperatingsystemsaresupported:
Pocket PCs:
• Pocket PC
• Pocket PC 2002
• Pocket PC 2003
Handheld PCs:
• Handheld PC 2000
CE .NET devices:
• CE .NET(4.1orlater)