Installation guide

Installation on Notebook PCs
Rev 4 Mar.11 19
Windows 95 installation
Preinstallation procedures
Note: Windows system files may be required to complete installation
of the AirCard 555 driver. These files are located on the Windows CD
and may be stored on your hard drive in .CAB files. Ensure you have
your Windows CD, or know the location of the .CAB files before
proceeding.
DependingonhowWindows 95wasinstalledonyourPCand
whatdeviceshavesincebeeninstalled,yourPC Card
(PCMCIA)slotsmayormaynothavebeenenabledandthe
TCP/IPstackmayormaynotbeinstalled.SincetheAirCard
requiresthese,thissectionguidesyouthroughthesesteps.
Verifying that the PC Card slots are enabled
1. OpentheControlPanelbyselecting
Start > Settings >
Control Panel
.
2. DoubleclickthePC Cardicon.
3. IfthePC Card(PCMCIA)Propertieswindowisdisplayed,
theslotsareenabledandyoucanproceedtothesection
“VerifyingthatTCP/IPisinstalled”onpage 19.
IfthePC Card(PCMCIA)Wizardisdisplayed,theslotsare
notyetenabled.Thewizardguidesyou
throughthe
enablingprocess.(Generallyitissufficienttoclick
Nextat
eachwindow.)WhenpromptedtorestartthePC,click
Yes.
Verifying that TCP/IP is installed
1. IftheControlPanelisnotalreadyopen,select
Start >
Settings > Control Panel
toopenit.
2. DoubleclicktheNetworkicon.
3. Lookfor“TCP/IP”nexttoanylistingonthe Configuration
tab.
· IfTCP/IPislisted,youcanclosethewindowand
proceedtothesection“Windows 95,98,Me,2000,and
XPinstallationprocedures”onpage 20.
Me page 20
98 / 98SE page 20
NT page 22
95 OSR2 page 19
Operating System Page