User guide

Rev 6 Dec.10 9
AirCard Data Card features
LED operation
Status LEDs
Modem shown inserted in an
ExpressCard-to-PC Card adapter.
The antenna can be flipped up
to improve reception.
LED State Indicates
Power Off Indicates one of the following states:
• The AirCard Data Card is not inserted in the computer.
• The computer is off or in “suspend and resume” mode.
• The AirCard Data Card radio has been turned off using Watcher or other
connection manager software.
Solid Blue The power is on, the AirCard Data Card is working normally.
Blinking Blue The firmware is being updated.
Do not remove the AirCard Data Card from the computer.
Blinking Amber The AirCard Data Card is searching for service (initializing).
Solid Amber Error—either the AirCard Data Card is having a problem initializing (searching for
service) or is offline because of a failure.
Contact your service provider.
Data Off The AirCard Data Card is unable to detect 2G or 3G service.
Blinking Amber The AirCard Data Card has detected a 2G network (EDGE, GPRS, GSM) and is ready
to connect.
Solid Amber The AirCard Data Card is connected to a 2G network and is able to send and receive
data.
Blinking Blue The AirCard Data Card has detected a 3G network (UMTS, HSPA, HSPA+) and is
ready to connect.
Solid Blue The AirCard Data Card is connected to a 3G network and can send and receive data.