Specifications

Rev 7 May.12 Proprietary and Confidential 85
A
A, answer incoming call, 18
A/, re-issue last AT command, 18
!AUTH, run GSM algorithm on SIM, 82
B
!BAND, set/query frequency bands, 30
!BCINF, return bootloader version, 31
!BOOTHOLD, reset modem and wait for f/w download,
31
C
&C, set data carrier detected, 17
C, ITU T v.24 circuit 109 carrier detect signal behavior
command, 20
+CACM, accumulated call meter, 20
+CACSP, voice group or voice broadcast call state at-
tribute presentation, 20
+CAEMLPP, eMLPP priority registration and interroga-
tion, 20
+CAHLD, leave an ongoing voice group or voice broad-
cast call, 20
+CAJOIN, accept incoming voice group or voice broad-
cast call, 20
+CALA, alarm, 20
+CALCC, list current voice group and voice broadcast
call, 20
+CALD, delete alarm, 20
+CALM, alert sound mode, 20
+CAMM, accumulated call meter maximum, 20
+CANCHEV, NCH support indication, 20
+CAOC, advice of charge, 20
+CAPD, postpone or dismiss an alarm, 20
+CAPTT, talker access for voice group call, 20
^CARDMODE, return SIM card type, 31
+CAREJ, reject incoming voice group or voice broadcast
call, 20
+CAULEV, voice group call uplink status presentation,
21
+CBC, battery charge, 21
+CBM, cell broadcast message directly displayed, 19
+CBMI, cell broadcast message stored in memory at
specified location, 19
+CBST, select bearer service type, 21
+CCCM, current call meter value, 21
+CCFC, call forwarding number and conditions, 21
+CCLK, clock, 21
+CCUG, closed user group, 21
+CCWA, call waiting, 21
+CCWE, call meter maximum event, 21
+CDIP, called line identification presentation, 21
+CDIS, display control, 21
+CDS, SMS status report after sending a SMS, 19
+CDSI, incoming SMS status report, 19
+CEER, extended error report, 21
+CFUN, set phone functionality, 21
+CGACT, PDP context activate or deactivate, 21
+CGANS, manual response to network request for PDP
context activation, 21
+CGATT, PS attach or detach, 21
+CGAUTO, automatic response to network request for
PDP context activation, 21
+CGCLASS, GPRS mobile station class, 21
+CGCLOSP, configure local octet stream PAD parame-
ters, 21
+CGCMOD, PDP context modify, 21
+CGDATA, enter data state, 21
+CGDCONT, define PDP context
, 21
+CGDSCONT, define secondary PDP context, 21
+CGEQMIN, 3G QoS profile (minimum acceptable), 21
+CGEQNEG, 3G QoS profile (negotiated), 21
+CGEQREQ, 3G QoS profile (requested), 21
+CGEREP, packet domain event reporting, 22
+CGEV, GPRS network event indication, 22
+CGIEV, indicator event, 22
+CGMI, request manufacturer identification, 22
+CGMM, request model identification, 22
+CGMR, request revision identification, 22
+CGPADDR, show PDP address, 22
+CGQMIN, QoS profile (minimum acceptable), 22
+CGQREQ, QoS profile (requested), 22
+CGREG, GPRS network registration status, 22
+CGSMS, select service for MO SMS messages, 22
+CGSN, request product serial number identification, 22
+CGTFT, traffic flow template, 22
+CHLD, call-related supplementary services, 22
+CHSA, HSCSD non-transparent asymmetry configura-
tion, 22
+CHSC, HSCSD current call parameters, 22
+CHSD, HSCSD device parameters, 22
+CHSR, HSCSD parameters report, 22
+CHST, HSCSD transparent call configuration, 22
+CHSU, HSCSD automatic user initiated upgrading, 22
+CHUP, hangup call, 22
+CIMI, request international mobile subscriber identity,
22
+CIND, indicator control, 22
+CKEV, key press or release event, 22
+CKPD, keypad control, 22
+CLAC, list all available AT commands, 22
+CLAE, language event, 22
+CLAN, set language, 22
+CLCC, list current calls, 22
+CLCK, facility lock, 23
+CLIP, calling line identification presentation, 23
+CLIR, calling line identification restriction, 23
+CLVL, sets/returns internal loudspeaker volume, 23, 32
+CMAR, master reset, 23
+CME ERROR, mobile termination error result code, 23
+CMEC, mobile termination control mode, 23
Index—AT Commands