Specifications

Modem Status, Customization, and Reset Commands
Rev 7 May.12 Proprietary and Confidential 73
+WPOWER
Supporting chipsets:
• All, with these exceptions:
• MDM8200 (min f/w rev:
M2.0 Release 1)
• MSM6290 (min f/w rev:
K2_0_6_5ap)
Return average WCDMA power level over time period
Enable/disable logging of WCDMA power level values.
Usage:
• Execution: AT+WPOWER=<state>
Response: +WPOWER:
ENABLED!
or +WPOWER:
DISABLED!
OK
Purpose: Enable/disable logging of WCDMA power information.
• Query: AT+WPOWER?
Response:
+WPOWER:
Status: 1
average RxM Power <rxm>dBm, total samples <numRXM>
no valid WCDMA RxD Power value available!
no valid WCDMA Tx Power value available!
OK
or
+WPOWER:
Status: 1
average RxM Power <rxm>dBm, total samples <numRXM>
average RxD Power <rxd>dBm, total samples <numRXD>
average Tx Power <txd>dBm, total samples <numTXD>
OK
or
+WPOWER:
Status: 1
average Car0 RxM Power <rxm0>dBm, total samples
<numRXM0>
average Car0 RxD Power <rxd0>dBm, total samples
<numRXD0>
average Car1 RxM Power <rxm1>dBm, total samples
<numRXM1>
average Car1 RxD Power <rxd1>dBm, total samples
<numRXD1>
average Tx Power <txd>dBm, total samples <numTXD>
OK
or
+WPOWER:
Status: 0
no valid WCDMA Power value available!
Purpose: Display the power information.
Parameters:
<state> (WCDMA logging):
• 0=Disabled (Default)
• 1=Enabled
(Continued on next page)
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description