Specifications

Modem Status, Customization, and Reset Commands
Rev 7 May.12 Proprietary and Confidential 71
!UTCTIME
Supporting chipsets:
• MDM6200
• MDM8200A
• MDM8220 (min f/w rev:
N2.0 Release 1)
• MDM9200
• MDM9600
• MSM6290
• QSC6270
Set/return UTC time of day
Set or retrieve the UTC time of day.
Usage:
• Execution: AT!UTCTIME=<yyyy>, <mm>, <dd>, <hh>, <mm>, <ss>[, <tz>, <dst>]
Response: OK
Purpose: Manually set the UTC time of day.
• Query: AT!UTCTIME?
Response:
!UTCTIME:
<yyyy>/<mm>/<dd>
<hh>:<mm>:<ss>
TZ:<tz>
DST:<dst>
OK
Purpose: Display the current UTC time of day (previously set manually or by the
network).
• Query List: AT+UTCTIME=?
Purpose: Display valid parameter values
Parameters:
<YYYY> (Year):
• 4 digits
<MM> (Month):
• Valid range: 01–12
<DD> (Day):
• Valid range: 01–31
<hh> (Hour):
• Valid range: 00-23
<mm> (Minute):
• Valid range: 00–59
<ss> (Second):
• Valid range: 00–59
<tz> (Time zone offset from UTC in 15-minute increments):
• Valid range: -48 to 48
• <DST> must also be set if <tz> is used
<dst> (Daylight Saving Time offset in 1-hour increments):
• Valid range: 0 to 2
• <tz> must also be set if <dst> is used
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description