Specifications

UMTS AirCard⁄ AirPrime Supported AT Command Reference
56 Proprietary and Confidential 2130617
!SCPADDR
Supporting chipsets:
• All
Return IP address for specified PDP context
Return the IP address of the specified PDP context (profile), or for all profiles.
Usage:
• Execution: AT!SCPADDR=[<pid>]
Response:
!SCPADDR: <pid><addr>
[!SCPADDR: <pid>, <addr>
[...] ]
OK
Purpose: Return the IP address for the specified <pid>. If <pid> is blank, return
IP addresses for all defined profiles.
Parameters:
<pid> (Profile ID (PDP context)):
• Valid range: 1–16
<addr> (IP address of <pid>):
• ‘Dot’ format IP address (for example, 255.255.255.0)
!SCPROF
Supporting chipsets:
• All
Set/return SWI-specific profile information
Set or return the SWI specific information for a profile.
Usage:
• Execution: !SCPROF=<pid>, Label>, <autoconnect>, <promptforpassword>,
<autolaunchapp>, <rffu>
Response: OK
Purpose: Set the SWI-specific information for the specified profile (<pid>).
• Query: !SCPROF?<pid>
Response:
!SCPROF: <pid>, <label< <autoconnect>, <promptfor-
password>, <autolaunchapp>, <rffu>
Purpose: Report current SWI-specific information for the specified profile
(<pid>).
Parameters:
<pid> (PDP context definition):
• Valid range: 1–16 — a valid profile ID that will be used as the default
<label> (Configuration buffer label):
• 30-character string surrounded by quotation marks
<autoconnect> (Automatic context activation mode):
• 0=manual activation
• 1=auto activation
<promptforpassword> (Flag value (prompt for password)):
• 0=do not prompt for password
• 1=prompt for password
<autolaunchapp> (Flag value (auto launch application)):
• 0=do not auto launch the application
• 1=auto launch the application
<rffu> (Reserved for future use):
• 0–32767=Reserved
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description