Specifications

Modem Status, Customization, and Reset Commands
Rev 7 May.12 Proprietary and Confidential 55
!SCLTEPROF
Supporting chipsets:
• MDM9200
• MDM9600
Set/return profile ID to attach on LTE network
Set/return the profile ID on which user equipment will attach when camped on an LTE
network.
Usage:
•
Execution: AT!SCLTEPROF=<pid>
Response:
OK
Purpose: Set the profile ID to use in the LTE attach process.
• Query: AT!SCLTEPROF?
Response:
<pid>
OK
or ERROR (if an attached profile is not set)
Purpose: Return the profile ID currently set for use in the LTE attach process.
Parameters:
<pid> (Profile ID):
• Valid range: 1–16
!SCNETDNS
Supporting chipsets:
• MDM6200
• MDM6270
• MDM8200A
• MDM8220 (min f/w rev:
N2.0 Release 1)
• MDM9200
• MDM9600
• MSM6290 (min f/w rev:
K2_2_0_11, K2_0_7_46)
• QSC6270
Return DNS addresses for active profiles
Return the network-provided DNS addresses associated with all active profiles.
Usage:
• Query: AT!SCNETDNS?
Response:
!SCNETDNS: <pid 1>, <dns 1>
!SCNETDNS: <pid 1>, <dns 2>
...
!SCNETDNS: <pid n>, <dns m>
OK
Purpose: Return all DNS address for each active profile.
Parameters:
<pid> (PDP context definition):
• Valid range: 1–16 — Active profile ID
<dns> (Network-provided DNS address):
• IPv4 or IPv6 address. For example, 10.10.10.1 or
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:0001
• Address provided OTA during PDP context activation, or through user-provided
override.
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description