Specifications

UMTS AirCard⁄ AirPrime Supported AT Command Reference
44 Proprietary and Confidential 2130617
!GSTATUS (continued)
Return operational status (continued)
Response (CDMA):
!GSTATUS:
Current Time: <ctime> Temperature: <temp>
Bootup Time: <btime> Mode: <mode>
System mode: <smode> PS state: <PSstate>
CDMA band: <cband>
CDMA channel: <cchan>
GMM (PS) state: <gmmstate> <gmmsubstate>
MM (CS) state: <mmstate> <mmsubstate>
OK
Purpose: Display modem operational status information.
Parameters:
<ctime> (Current time (Seconds from bootup))
<temperature> (Approximate temperature (
5C))
<btime> (Bootup Time (Seconds from reset))
<mode> (Current modem mode):
• Valid values:
• “POWERING OFF”
• “FACTORY TEST”
• “OFFLINE”
• “ONLINE”
• “LOW POWER MODE”
• “RESETTING”
• “NETWORK TEST”
• “OFFLINE REQUEST”
• “PSEUDO ONLINE”
• “Unknown”
<smode> (System mode acquired by modem):
• Valid values:
• “No service”
• “AMPS”
• “CDMA”
• “GSM”
• “HDR”
• “WCDMA”
• “GPS”
• “WCDMA+GSM”
• “Unknown”
<PSstate> (Current PS state):
• Valid values:
• “Attached”
• “Not attached”
(Continued on next page)
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description