Specifications

UMTS AirCard⁄ AirPrime Supported AT Command Reference
28 Proprietary and Confidential 2130617
!GVER Return the firmware version 49
!GVERBT Return the boot loader version 49
^HVER Return the modem hardware version 49
!MAPCSD Map CSD service to port 50
!PCTEMP Return current temperature information 50
!PCVOLT Return current power supply voltage information 51
!POWERDOWN Power down system 51
!REL Return active protocol/revision 52
!RESET Reset modem 52
+RSCP Return Received Signal Code Power (RSCP) (WCDMA only) 53
!SCACT Activate/deactivate PDP context for FIFO interface 53
!SCDFTPROF Set/return default profile ID 54
!SCDNS Set/return profile ID DNS address 54
!SCLTEPROF Set/return profile ID to attach on LTE network 55
!SCNETDNS Return DNS addresses for active profiles 55
!SCPADDR Return IP address for specified PDP context 56
!SCPROF Set/return SWI-specific profile information 56
!SCPROFDEL Erase profile information 57
!SCWINS Set/return profile’s WINS addresses 57
!SDNOTINSTALLED Return SD installation status 57
!SELMODE Set/return current service domain 58
!SELRAT Set/return current radio access technology (RAT) 59
!SIMNOTINSTALLED Return SIM installation status 59
!SIMRSTC Enable/disable SIM refresh reset notification 60
!SMSRETRY Set/return SMS retry period and interval 61
!SMSSTSEN Enable/disable SMS status reports 62
!SWICALLPROG Enable/disable Call Progress Notification 63
^SYSCONFIG Set/return system configuration information 65
^SYSINFO Return service status information 66
!TIME Set/return current time of day 67
!UDINFO Return information from active USB descriptor 68
+UPSC Return Primary Scrambling Code (WCDMA only) 68
+USET Return WCDMA set information 69
Table 3-1: Modem status commands (Continued)
Command Description Page