AirCard 402 Wireless Modem With Quick Start Guide 2131300 Rev. 1.0 (Sep 2009) 2131300 - AirCard 402 QSG, no GPS - Mac, and Windows Watcher Contemporary Theme.indd 1 www.sierrawireless.
This guide provides installation instructions for users of: • • • • Windows® Vista Windows XP (Home and Professional versions) with Service Pack 2 or later Windows 2000 with Service Pack 4 and Update Roll‐up 1 Mac OS® X version 10.4.11 or newer. (To check your version of Mac OS X, from the Apple menu ( ) choose About This Mac.) If your Mac OS X version is earlier than 10.4.11, then you must upgrade to version 10.4.11 or newer.
2 3 Holding the locking tab, use your other hand to free the modem from the card adapter. Instructions for Windows users 1 Grip both sides of the card adapter and insert the modem and card adapter into your computer (modem label facing up). 2 If you’re running Windows Vista and the AutoPlay window is displayed, click Run setup.exe. 3 4 In the TRU-Install window, click OK. Gripping both sides of the modem, insert it into your computer (modem label facing up).
7 If the Automated Activation option is available, select it and follow the instructions on the screen. If the activation is successful, go to step 9. 8 Instructions for Mac users 1 Grip both sides of the card adapter and insert the modem and card adapter into your computer (modem label facing up). 2 3 4 In the window that appears, double-click Watcher Installer.mpkg. 5 6 In the “Standard Install on ...” window, click Install.
8 In the “Installation completed successfully” window, click Restart. 9 After your computer restarts, run Watcher: in Finder™, choose Go > Applications, and then double-click Watcher. Watcher should start. 10 11 If the New Port Detected window appears, click Continue. 12 If a window appears, prompting you to enter your password, enter your Mac password, and then click OK. Watcher displays a status message or an “Alert” window. Use the following table to determine your next actions.
Activation Assistant If your device is not activated, use the Activation Assistant: 1 From the Extras item on the Watcher menu, choose Activation. The Activation Assistant window is displayed. 2 3 Ensure you have the items listed in the Activation Assistant window, and phone your service provider. Inform them that you are activating a Sierra Wireless wireless device. Click Next. Follow the instructions of your service provider to activate your device.
