User guide

AirCard 402 ExpressCard/PC Card - User Guide
32 2131144
TheConnectbu tton isavailable;thesignalstrengthicon
(),coverageindicator(),andtheroamingicon
()arevisible.
Toconnecttothenetwork,clickthe
Connectbutton.
Connecting
Watcherisestablishingaconnectiontothenetwork.
Connected
Theconnectionisestablished.Inadditiontothesignalstrength
icon(),coverageindicator(),androamingicon
(),theamountoftimeyou’vebeenconnectedandthe
amountofdatareceived(Rx)andtransmitted(Tx)arealso
displayed.(Seethe
noteonpage 34.)
Toendtheconnection,click
Disconnect.
Call Dormant
Youareconnectedtothenetwork,butthereiscurrentlyno
traffic.
Device is Locked
Themodemislocked,sothatotherscannotusethemodem
andyouraccount.Tousemostofthefeatures,youmust
unlockthemodem(page 38 ).
Device is powered OFF
Themodemispoweredoff.Formoreinformation,see
“Poweringthe
modemoff”onpage 38.
Determining the type of coverage
AniconinWatcher()indicatesthetypeofcoverageyou
have(forexample,1X[synonymof1xRTT]or1xEV‐DO).See
thetableonpage 30.