User guide

AirCard 402 Modem - User Guide
22 2131144
13. Inthewindowwiththemessagethatyouwillhaveto
restartyourcomputer,click
Continue Installation.
14. Inthe“Installationcompletedsuccessfully”window,click
Restart.
15. Afteryourcomputerrestarts,configurethemodemtouse
youraccount(ifitwasnotpre‐activated),asdescribedin
“Activation”onpage 25.
Removing the modem
Toremovethemodem:
1. Endyournetworkconnection(inWatcher,click
Disconnect).
2. CloseWatcherifitisopen.
3. Pullthemodemoutoftheslotbygrippingbothsidesof
themodemandpullingthemodemstraightout.
Attaching an external antenna
Youcanimprovethesignalstrengthbyattachinganexternal
antennawithaTS9connector(soldseparately).Therecom‐
mendedantennaisthe6‐bandbladeantennawithTS9
connector,availablefrom
www.sierrawireless.com(partnumber
6000342).
Caution: Use of other antennas may violate FCC requirements.
Toattachtheexternalantenna:
1. Ifthemodemisinsertedinyourcomputer,removeit.
2. Gentlyflipopenthetabonthe sideofthemodem.
3. Holdtheantennacablebytheconnector(end)part,and
carefullyinserttheconnectorpartofthecableintothe
correspondingconnectoronthemodem.
Correct Incorrect