User guide

Document 2131145. Rev 1.0 May.09 23
4
4: Activation
• Account configuration
procedures
Account configuration
procedures
Thefinalsteptomakingthe modemoperationalisconfiguring
ittouseyourCDMAserviceprovideraccount.Theprocessof
activationconfiguresyourmodemwiththerequiredaccount
parameters(phonenumber,username,password,andsoon).
Ifyoupurchasedapre‐activatedmodem,thisstepisnot
necessary.Oncethe
applicationsoftwareanddriversare
installed,themodemisreadyforuse.Proceedto“Watcher
Basics”onpage 25.
Otherwise,youmusteitherallowusetheActivationWizardto
activateandconfigureyouraccount.
Activation Wizard
TheActivationWizardwalksyouthroughtheprocessof
configuringanaccount.Theprocessandoptionsvarybasedon
theserviceprovider.
Thissectionisaguideonly.ConsulttheQuickStartGuide,
andfollowthedirectionsonscreenandinstructionsgivenby
yourserviceproviderrepresentative.
Ifyourmodemdoesnot
haveanactivatedaccount,and
Watcherhasstartedautomatically,thentheActivationWizard
shouldstartautomatically.Ifthisdoesnothappen:
1. EnsureWatcherisrunning.Ifitisnot,double‐clickthe
Watchericononyourdesktop.
2. StarttheActivationWizard:clicktheMenubuttonand
select
Activation Wizard.
3. IftheAutomated Activationoptionisnotavailable,select
Manual Activationandgoto“Manualactivation”onpage 24.
4. Selectthe
Automated Activationoption.
TheactivationprogressisdisplayedintheActivationWiz‐
ardwindow.Iftheprocessissuccessful,thewindowdis‐
plays
“Activation successful”.