User guide

AirLink GX400 HSPA+ User Guide
34 2140712
Mounting Bracket Kit
An optional Mounting Bracket Kit (P/N 1202404) is available from Sierra Wireless
for mounting the GX400 when replacing a PinPoint X device. The GX400
Mounting Bracket Kit includes:
• One mounting adapter plate
• Four #8 sheet metal/wood-type screws
• Four internal lock washers
The adapter plate is designed to reuse the mounting holes of a PinPoint X for a
GX400 installation. The adapter plate is attached to a stationary location, and the
GX400 is attached to the adapter plate.
Figure 3-10: GX400 Adapter Plate and Dimensional Diagram (Not to scale)
Installation steps for the GX400 with adapter plate are as follows:
1. Position the adapter plate in the exact place where the PinPoint X was previ-
ously secured.
Note: When the adapter plate is correctly positioned, the small end of the keyhole
mounting hole will be on top.
Tip: For reasons of stability and to ensure a secure GX400 mount it is highly
recommended that all four mounting screws be used in the adapter plate installation.
2. Insert all four screws (with washers attached) through the recessed mounting
ears and the raised adapter plate mounting holes. Tighten the screws until
they are hand tight but secure.
3. Connect your power cable, serial or Ethernet cable, and all antennas to the
device’s interface ports.
162 mm
6.4 in
97.5 mm
3.8 in
147.9 mm
5.9 in
68.2 mm
2.7 in
4 Pics
8-32 Tap