User guide

AirLink MP User Guide
16 2130795
started, when the ignition is in accessory mode, or independently of the
ignition).
• If you are installing the MP modem in an office, an AC/DC adapter is
available.
Warning: Risk of electric shock: Only use the supply voltages listed in this user guide.
Warning: When using AC to DC adapter the ambient temperature should not exceed
40
0
C.
What type of connection(s) do you plan to use?
The MP modem is capable of the following kinds of network connections:
• Serial
• USB
• Ethernet
• Wireless Access Point via IEEE 802.11b/g (MP WiFi modems only)
Data transfer rates vary, depending on the network, but note that the highest data
rate using a serial connection is 115.2 kbps.
Required equipment
Package contents
Each MP modem box contains:
• The MP modem
• A mounting template
• Mounting screws and washers
• An installation and documentation CD
• A power harness
If any of these are missing, please contact your account manager.
Available Accessories
To install the MP modem, you need the power harness, or an AC/DC adapter (for
office installations), mounting template, and the screws and washers that come
with the device.
You may also require:
• A USB, Ethernet, or 9-pin serial cable. This must be long enough to run
from the mounting location of the MP modem to the computer.
· The maximum length for the serial or USB cable is 5.5 m (18 feet). The
USB cable must have a Type A male connector at the computer end and a
Type B male connector at the MP modem end.