User guide

AirLink GX440 for Verizon LTE User Guide
34 2140712
Mounting Adapter Plate
An optional Mounting Bracket Kit (P/N 1202404) is available from Sierra Wireless
for mounting the GX440 when replacing a PinPoint X device. The GX440
Mounting Bracket Kit includes:
• One adapter plate
• Four #8 sheet metal/wood-type screws
• Four internal lock washers
The adapter plate is designed to reuse the mounting holes of a PinPoint X for a
GX440 installation. The adapter plate is attached to a stationary location, and the
GX440 is attached to the adapter plate.
Figure 3-10: GX440 Adapter Plate and Dimensional Diagram (Not to scale)
Installation steps for the GX440 with adapter plate are as follows:
1. Position the adapter plate in the exact place where the PinPoint X was previ-
ously secured.
Note: When the adapter plate is correctly positioned, the small end of the keyhole
mounting hole will be on top.
Tip: To ensure stability and a secure GX440 mount, we highly recommend that all four
mounting screws be used in the adapter plate installation.
2. Insert all four screws (with washers attached) through the recessed mounting
ears and the raised bracket mounting holes. Tighten the screws until they are
hand tight but secure.
3. Connect your power cable, serial or Ethernet cable, and all antennas to the
device’s interface ports.
162 mm
6.4 in
97.5 mm
3.8 in
147.9 mm
5.9 in
68.2 mm
2.7 in
4 Pics
8-32 Tap