User guide

Installing and Activating the AirLink GX440
Rev 1.0 Jan.12 33
Mounting an AirLink GX440
The GX440 can be mounted almost anywhere using the device’s recessed
mounting ears. An optional mounting kit (with mounting adapter plate) is also
available when replacing a PinPoint X device.
Mounting Hardware
All GX440s are shipped with a Hardware Mounting Kit (P/N 1202162) that
contains four #8 sheet metal/wood-type screws and four internal lock washers.
Figure 3-9 is a diagram (with dimensions) of the GX440’s mounting base.
Figure 3-9: Diagram of the GX440 Base (Not to scale)
To mount the GX440:
1. Place the GX440 in the exact position where the unit is to be secured.
2. Using a pencil or applicable writing tool, outline the four mounting ear holes
on the mount surface.
3. Remove the GX440, and drill a small “starter” hole at the center of each
outlined hole.
4. Replace the GX440 to its mounting position, insert all four screws (with
washers attached) through the recessed mounting ears, and tighten the
screws until they are hand tight and secure.
95.2 mm
3.75 in
131.8 mm
5.19 in
40 mm
1.57 in
22.3 mm
0.88 in
32 mm
1.26 in
142 mm
5.59 in
GX440 FRONT
4 X 6.0 mm D