User guide

Installing and Activating the AirLink GX440
Rev 1.0 Jan.12 25
Activating the AirLink GX440
To activate your AirLink device:
1. Connect the GX440 antennas. (See Connecting Antennas on page 26.)
2. Insert your SIM card into the GX440:
a. Using a 5/64” or 2 mm Allen wrench, remove the four retaining screws
that attach the black, top cover to the GX440 chassis. Remove the cover,
and place it aside with the four screws.
b. Insert the SIM into the card tray. Push the SIM in until it clicks in place.
c. Replace the cover and retaining screws.
3. Connect the GX440 power cable to the DC Power port on the back of the
GX440, and plug into a nearby outlet. (See Connecting to Power on page 28.)
4. Connect your computer to the GX440 with an Ethernet, serial, or USB cable
(See Connecting to a Computer or Other Device on page 30.)
5. Observe the light patterns of the LEDs. (See LED Operation on page 31.)
Wait 60-90 seconds for the GX440 to initialize and go on the air.
Updating AirLink GX440 Firmware
Install the latest firmware version (.exe file) from ACEmanager using the
Firmware link.
Confirming the IP Address
Check the IP Address in your Local Area Connection window. The IP Address in
the window in Figure 3-2 is for a USB/net connection.
Figure 3-2: Confirm IP Address