User guide

AirLink Communications December 2006 4
Windows Dial Up Networking (DUN) for AirLink Modems
FIGURE 6. Finish
a. When you return to the Phone and Modem Options window, you should see the newly
installed modem “attached to” the correct COM port. Highlight the modem and select Proper
-
ties.
FIGURE 7. Modems
b. Select the Modem tab. Maximum Port Speed should be set to 115200 (default). Select OK
to exit.
FIGURE 8. Setting Maximum Port Speed Maximum Port Speed
c. Select OK again to exit out of the Phone and Modem Options.
3.
Configure the driver.