User guide

AirLink Communications December 2006 3
Windows Dial Up Networking (DUN) for AirLink Modems
FIGURE 3. Install New Modem
c. Check Don’t detect my modem; I will select it from a list and select Next.
d. Select (Standard Modem Types) from the Manufacturers column, select Standard 33600
bps Modem from the Models column, and select Next.
FIGURE 4. Modem Driver
e. Check Selected Ports, select the COM port the modem is connected to (commonly COM1),
and select Next.
FIGURE 5. Modem Port
f. Once the modem driver is installed, select Finish.
Note: If you have the speed for your modem configured as something other than
the default, use the Standard Modem that matches the speed you configured.