User guide

AirLink Communications December 2006 12
Windows Dial Up Networking (DUN) for AirLink Modems
b. Select the DUN connection you have already installed on your computer from the drop
down menu once you select Auto Start (you may only have 1 selection which would be prese
-
lected for you).
Note: When using the DUN connection, make sure the IP Address is set to the local
IP address of the modem.
c. Select Maintain Persistent Connection: When checked, AceView will continually check
the DUN connection to ensure it is not down. If so, AceView will attempt to connect again.
d. Click OK.
FIGURE 23. AceView: Connection Settings
AceView’s window will show the dynamically updated status of your connection to your wireless
service provider as well the status of the connection between your computer and your AirLink
modem. .
Windows 98 and Windows NT
The direct DUN connection features of AceView are not available in Windows 98 or Windows
NT.
Establishing a DUN Connection with Windows Networking
1.
Start the DUN session.
Start > Connect To > AirLink 3G Connection (or whatever you named the connection).