User guide

Activating the Raven XE
Rev 3.0 Feb.12 29
*Can be changed via ACEmanager
Figure 3-4: Configuration: Interface selection
c. The next screen will prompt you to reset the modem manually. Reset the
modem, and click on Next.
Installation begins and can take up to a few minutes. Once the installation is
complete, you will get a confirmation screen.
Table 3-1: Factory Defaults
Interface Raven XE Connected Device
Ethernet Private default 192.168.13.31* 192.168.13.100
USB/NET 192.168.14.31 192.168.14.100
DUN 192.168.15.31 192.168.15.100