User`s guide

GRIP Quick Start 3.1.0
15
The Output Control window sends the selected outputs to be controlled, to the panel
(when “Send Current Panel” is pressed).
The Actual Status window displays the current outputs that are controlled by the selected
panel.
All SVS control panels can have outputs blocked, this allows the control panel to status
an output, but prevents the panel from selecting inputs on that output.
The “LED Tally Level” selects which level a non SCP Pushbutton panel’s lamps will
follow.
The Level buttons select which levels the panel will control.
Example; If the panel is to be a Video Only control panel, Disable all levels other than the
Video level. When the panel is switched, only the Video level will change.