User manual

Defining the RC-3TB Remote Control Panel (Optional)

(see Table 4) determines which of the 12 pushbuttons on the SL-14RC are

emulated by pushbuttons 2 and 3 on the RC-3TB.

Table 4: RC-3TB Rotary Switch Pushbutton Assignment

Rotary Switch

Position

Button 1 Button 2 Button 3

0 12 7 8

1 12 7 9

2 12 7 10

3 12 8 9

4 12 8 10

5 12 9 10

6 12 7 9

7 Service use only

For example, if the rotary switch is in position 4, the 3 pushbuttons on the

RC-3TB will duplicate the functions of pushbuttons 12, 8, and 10 on the

SL-14RC. That is, in this example, pressing button 1 on the RC-3TB has the

same effect as pressing pushbutton 12 on the SL-14RC, pressing button 2 on

the RC-3TB has the same effect as pressing pushbutton 8 on the SL-14RC,

and pressing button 3 on the RC-3TB has the same effect as pressing

pushbutton 10 on the SL-14RC.

Note: The rotary switch configuration is only read at switch on. Therefore,

when changing the rotary switch position, you must switch off the SL-14RC

and then switch it on again for the new settings to take effect.

For details of how to connect the RC-3TB, see

Section 6.3.