User manual

Operating the SL-14RC Master Controller
11
Connections to an SL-14RC or to another RC-3TB can be made to either
connector block as the connector blocks have identical functionality.
7 Operating the SL-14RC Master Controller
You can operate your SL-14RC using:
• Front panel pushbuttons. These are configured using the RC-SV
configuration software. For instructions on using the software, see the
RC-SV Configuration Guide available from our Web site
1
• RC-3TB Remote Control Panels (optional)
• A PC running Site-CTRL control software:
To operate your device using Site-CTRL, see the Site-CTRL User
Guide available at the Kramer Web site
2
8 Technical Specifications
The SL-14RC technical specifications are shown in
Table 5.
Table 5: SL-14RC Master Controller Technical Specifications
3
INPUTS: K-Net and 6 RS-232 on terminal block connectors; Ethernet on an RJ-45
connector; 1 infrared
OUTPUTS: 2 relays (36V AC or DC, 2A, 60VAC maximum on non-inductive load), 1
GPI/O, and 2 IR ports on terminal block connectors
DEFAULT IP SETTINGS:
IP number − 192.168.1.39
Mask – 255.255.0.0
Gateway – 0.0.0.0
POWER SOURCE: 100-240 VAC, 50/60 Hz, 22VA
DIMENSIONS: 48.26cm x 11.5cm x 1U (19" x 4.5" x 1U) W, D, H
WEIGHT: 0.6kg (1.4lbs) approx.
OPTIONS:
RC-3TB Remote Control Panel, IR emitter cables
The RC-3TB technical specifications are shown in Table 6
Table 6: RC-3TB Remote Control Panel Technical Specifications
.
3
DIMENSIONS: 8.9cm x 2.1cm x 2.3cm (3.5" x 0.8" x 0.9”) W, D, H
WEIGHT: 0.1kg (22oz) approx.
1 www.kramerelectronics.com
2 Available in the near future
3 Specifications are subject to change without notice