User`s manual

SM-XX

Tally Properties Tab (Video Object)

This tab only exists in tiles that are of Video type.

Tally - select hardware, or one of two software tallies. The hardware tally is related to the

source of the video window. There are 16 GPI inputs; one for each source. The two

software tallies operate in accordance with TSL protocol. This has up to 127 display

addresses; each address comprising 4 tallies and a UMD. Address 0 of the protocol is

assigned to the first video source. Address 1 is assigned to the second video source, etc.

Each video window can use the first 2 tallies of its display address to trigger the 2 tallies

available in its UMD bar, or the border tally if set up appropriately.

Style - select red-green, green-red, red-red and green-green.

Shape - select fill, square or round.

Position - select UMD, border or UMD and border.

Disabled - sets the disabled color to either default disabled color, UMD color, border

color,

or the user selected color set in the box below this control

Color - selects disabled color if disabled color is set to the user-selected source.

Visible - turns the display of the tally on / off.