User`s manual

SM-XX
7
Using the Web Interface
The QUAD multi-viewer is controlled via a browser using web pages hosted by the frame
itself. Note that Java must first be installed on the PC or MAC that is to be used. This is
available as a free download from: http://www.java.com/en/download/manual.jsp
Note: The default IP Adress is 192.168.0.120
To access the web interface, type the IP Address configured for the frame into a browser
and the Java application should launch immediately. Java certificates should not need to
be imported, but if the certificate is not already on the system being used, then Java will
ask for permission to continue before starting the applet (the certificate required is stored
in the SM-xx). If ‘Run’ is selected without ticking the box for ‘Always trust content from
this publisher’, then the certificate will not be installed, but the applet will run. It is best to
tick the box so that the certificate is installed to avoid seeing the same message next time
the browser is to be accessed (assuming that the same system is to be used).
Note that depending on the system being used to access the web interface, one or more
factors such as Windows security, third party security products, firewalls and browser
security settings may prevent the applet loading from the SM-xx. For example, if using
MS Internet Explorer 7, the security setting should be no higher than ‘Mid’.