User`s manual

SIERRA VIDEO

For example, if selecting channel D2, the audio signals on channel D2 are embedded into

the HDMI output signal, or monitored via VGA/Audio output module of main output card.

Choose Screen 2. And channels in the drop-down list are all located on Screen 2, and

then choose one of them. For the HDMI+HDSDI output card, audio signals from input

source, currently displayed on the selected channel, are embedded into HDMI output

signal of the slave output card. For the HDMI+VGA output card, they are monitored via

the audio output interface provided by VGA/Audio output module of the slave output card.

For example, if selecting channel B3, audio signals on channel B3 are embedded into the

HDMI output signal, or monitored via VGA/Audio output module of the slave output card.

Note:

Remote serial selection of the input channels to monitor has been added to only the HDHDMI

Output Module systems with software release V2.3715S and later.

See Section 4 Communication Protocols and the Audio Monitoring Selection pages near the end

of this manual.