User`s manual

LOCAL CONTROL PANEL OPERATION
23
Split Switching (break-away);
 A “split” (break-away) switch is when the video and audio of a single source is sent to
different outputs.
 Press V/A until screen displays “Preset V/A”.
 Press [Select] until “Out” is flashing.
 Choose the output using the rotary knob.
 Pressing [Select] will cause the screen to toggle between Output, the video and
audio source, the video source only, or the audio source only.
 Toggle through the screens and select the Input(s) you want to change using the
rotary knob.
 Press [Take] to activate the switch.
Switching by Level;
Switching by Level allows you to specify the Video or Audio level you want to switch.
 Press V/A until screen displays “Preset V” or “Preset A”.
 Pressing [Select] will cause the screen to toggle between out, and in.
 Choose the output using the rotary knob.
 Choose the input using the rotary knob.
 Press [Take] to activate the switch.
Status
Momentarily pressing the “Menu” button causes the display to toggle through 3 different modes;
 “Preset AFV”- This mode is used for switching the router (see above).
 “Status by Input”
 “Status by Output”
Turn the rotary knob to select the Input or Output you want to status.