User`s manual

INSTALLATION
13
Audio Adjustments
Unity gain is set at the factory. Audio gain is adjusted via a menu option. See “Menu Items” in the
Operation section Chapter 3. Audio gains may also be adjusted via the 9 pin serial port using the
TyLinx Pro Software program (refer to the TyLinx Pro manual), or using Host protocol (see
Communication protocol Ch. 4).
Audio Follow Video and Breakaway Audio Configurations
Component video channel (YC, RGB etc.) signals are switched by separate crosspoint modules.
All crosspoint modules will be switched at the same time. Audio can be switched following the
video or separately after the breakaway.