Instruction manual

Instruction Manual Smart-Trak
®
50 Series
IM-50 Rev. A.2 25
Using the 50 Series Software
A. Software Window
Across the upper half of the 50 Series User Software window, you will see three yellow
boxes. These are titled:
 Flow
 Setpoint (flow controllers only, meters will have numbers grayed out)
 Full Scale
These boxes display the current operating conditions of your 50 Series instrument. The
features of these boxes are described below.
Flow
The box displays the mass flow rate, the engineering units, and the gas type listed.
Setpoint
The Setpoint box displays the current setpoint given to the flow controller in the
‘Adjustments’ window, the engineering units, the source of the setpoint signal, the dac values
for the valve (for Sierra troubleshooting only).
Full Scale
The box displays the full scale flow rate, the engineering units, the Com Port selected, and
communications count.