User`s manual

1602 SERIES HD/SDI SHASTA HD SCANNING ROUTER
19
Status
When an output is selected, the input currently connected to that output will light. When
video & audio are routed from the same source to the currently selected destination, then
only that source button lamp will be lit.
When video and audio are switched to a destination from different sources (break-away)
the video source status is indicated by an input button light steadily on and the audio
status by a blinking button.
When a crosspoint switch is initiated from a point of control other than the local
pushbutton interface, AND it involves the currently selected destination, THEN the source
button tallies will be updated automatically.
Panel Lock
The local control panel can be “locked” to prevent front panel switching. To lock the front
panel, hold down the “A” and “V” buttons for 3 seconds and release. To unlock, repeat
the process.
If switching is attempted when the panel is locked, all buttons will flash.