User`s manual

SIERRA VIDEO
18
Scan Mode
The 1602 Shasta HD router has a “scan” feature. Output 1 can be set to automatically
switch selected inputs at a “user determined” time interval.
To set the router in the scan mode;
Press and hold the output 1 and 2 buttons until both buttons flash to put in the
scan mode.
To set the scan interval;
Press the output 2 button, Select a value (in seconds) by pressing the input
button.
Press the output 1 button to escape the scan interval mode.
To select the inputs to be scanned;
When the scan mode is initialised, all inputs will scan. While in the scan mode,
press the input button to disable the input from being scanned.
To review the inputs selected to scan, press and hold the output 1 button. Inputs
selected to scan will light.
To escape the scan mode;
Press and hold the output 1 and 2 buttons until both buttons flash.