User`s manual

SIERRA VIDEO
16
Ethernet Control
There are two screens for switching the router. Selecting “I/O” displays the following screen;
To switch the router, select (left mouse click) on a destination, the button will turn red. The current
status will be indicated by the current source button will turn red.
Status can also be checked by hovering the mouse pointer over a destination. The destination
button will turn blue and the corresponding source that is connected to that destination will also
turn blue.
Another method of switching is by selecting “TL Control”.
This screen displays a “grid” of sources and destinations. Left click on the I/O grid lines
that intersect the source and destination to switch. Status is indicated by a blue dot at the
I/O grid line.
Note:
The Ethernet port will also accept HOST protocol commands to switch the router.