User`s manual

SIERRA VIDEO SYSTEMS
18
Select System Parameters – Selecting system parameters allows access to adjust various
settings of the 9 pin serial port and control panel port on the rear of the router. A “Disable Front
Panel” option is also contained in this menu.
Adjust Audio Gains – This menu path allows the input gain to be adjusted. The input gain may
be changed from –10db to +20db in .5db to 1db increments. The output gain can be changed
from output mute, -61db to +15db in .5db to 1db increments.
Select Salvo Register – Allows selection and execution of Salvos stored in the router. A Salvo is
a group of Sources and Destinations that are stored in the routing switcher and switched by a
single “Salvo Take” command. GRIP Routing Software allows up to 40 Salvos to be named and
stored in the routing switcher. The salvo name will be displayed in the Salvo register. Salvos are
made and stored in the router using the Sierra Video Systems Software program GRIP. See the
GRIP manual for details on creating and storing salvos.
Switching the Router
The router is switched by selecting the output (Destination) first.
? Press [V/A] until the screen displays “Preset AFV” (audio follow video).
? Press [Select] until “OUT” is flashing.
? Choose the Output (destination) using the rotary knob.
? Press [Select] to cause “IN” to flash.
? Choose the Input (source) using the rotary knob.
? Press [Take] to activate the switch.
Split Switching
A “split” (break-away) switch is when the video and audio of a single source is sent to
different outputs.
? Press [Select] until “OUT” is flashing.
? Choose the Output (destination) using the rotary knob.
? Press [Select] and “IN” will flash.
? Pressing [V/A] will cause the screen to toggle between “Preset V” (video), “Preset A”
(audio) or “Preset AFV” (audio follow video);
?
?
?
? Select the source you wish to change (Indicated by a flashing “A” or “V”) with the
rotary knob.
? Press [Take] to activate the switch.
Preset
V/A
IN: (V)xxx (A)xxx
OUT:
xxx