User`s manual

VS/DE SERIES

Audio Adjustments

Unity gain is set at the factory. Audio gain is adjusted via a menu option. See “Menu Items” in the

Operation section Chapter 3. Audio gain can also be adjusted via the 9 pin serial port using the

SVS GRIP program (refer to the GRIP manual), or SVS serial protocol (see the communication

protocol section of this manual for details).

Audio Follow Video and Breakaway Audio Configurations

Video and Audio signals are switched by separate crosspoint modules. All crosspoint modules

can be switched at the same time. Audio and video can be switched separately (breakaway) if

desired.

Connecting Peripherals

Control panels, sync inputs, and power are all connected to the rear of the frame. The peripherals

area may vary depending on the model size and type.

*Exact location of connectors may vary on some models.

Video Sync

Referencing

Inputs

232 and RS

422 control

connector

Control Panel

Connectors

Power Switch

Female Power

Connection

Ground

Connection

8-32 Thread