User`s manual

Sierra Video Systems
8
Connecting To Video Devices
Video sources and output devices (such as monitors, or recorders) may be connected to
the routing switchers through the BNC type connectors located on the back of the unit.
Keep in mind that the output signal format will be that of the input signal format.
All signal connections that use more than one cable interconnecting between devices
should be of equal timing length (example: cables between a camera and the switcher
should have the same time delay).
Unused outputs do not need to be terminated.
Connecting Peripherals
Control panels, sync inputs, and power are all connected to the rear of the frame. The
peripherals area may vary depending on the model size and type.
905016 Frame
RS-232
Serial Control
SYNC
Control Panels